Scott & Tanya Card RV9A build log (N4822C)

I left off with parts prep at the elevator counterbalance ribs just before I setup to do a bunch of priming. So that is where I pickup again. I got the elevator parts back out and re-checked hole alignment in the counterbalance ribs and did some hole dimpling in the ribs.

 

  

 

This entry was posted on Monday, December 27th, 2004 at 1:17 pm and is filed under Elevators. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.