canopy fairing
After doing a couple more minor sanding and filler sessions with microbeads, I decided it was time to start the fiberglass layup. I didn’t put too much effort into a perfect filler contour before glassing. I figure there will be plenty of shaping ahead. Anyway, Tanya helped me a little with the first few strips to go on, then I was on my own for the last few wide strips and peal ply. My biggest fear with this stuff is delamination much later down the road. I guess I’ll get more comfortable with the quality of this layup as I start sanding on it. It should be good to go. Tomorrow I’ll pull off the peal ply to see what we have…
