unswitched audio input
I’m working on completing the remaining unswitched audio input signals into the audio panel from the AOA, EFIS, and EIS. I tested the AOA signal for the first time. I decided it was a bit too loud. There is a very small POT on the CPU board for the AOA that adjusts the output gain. So, I opened up the case and adjusted it. There is currently no audio output from the EFIS but the wire is there and there is a note in the documentation that it may be used in future software releases and that its output gain will be adjustable in the settings menu. So I will be connecting it to the audio panel. There is also an audio out from the EIS that sounds an intermittent tone when a warning limit is exceeded. I tested it out but decided that the tone was just too annoying in addition to the flashing big red light. I won’t be attaching the EIS audio out.
