Sand Fill
I’ve been continuing to sand and fill on the cowl for general shape. I’m planning on applying my first full coat of primer (UV Smooth Prime) soon. I spent one evening sanding the inside of the cowl with some 80 grit paper in prep for interior finishing with thinned epoxy to make future cleanup easier. I put the cowl and spinner back on the airframe for the first time since completing the side hinges and spinner. Looks good and I’m happy with the results. I think I have decided not to put a bunch of effort (we’ll see) into the cowl spinner ring. It just doesn’t matter if it is straight, square, smooth, etc. It is behind the spinner!
