Started trimming the plenum
I started trimming the plenum top. This is definitely not like working with any other glass on this build. It doesn’t cut very well with a cutoff wheel like everything else. I ended up having to trim the edges with some metal shears which tends to delaminate the layup. So I tried to cut just outside the line so I could sand to the line and hopefully end up with a reasonable edge. I also drilled the rest of the holes in the top to #30 with a plexi bit. I’ll open these up further for screws when I am done fitting. The cleco holes are just a lot easier to work with when doing a lot of off and on fitting.
