Ignition wires
I started terminating the coil end of the ignition wires. For recap, this is for dual P-mags with the unshielded auto wire harness provided, used with aircraft plugs in my application. The instructions are pretty straight forward. I’m using DC4 to lube up the boot and wire to be able to push the wire through. A silicone spray as suggested in the instructions would be great if you have some on hand. One tip that I goofed on the first couple of wires: Push the wire through the boot after cutting to length but before stripping it. You really have to wrestle it through the boot and you don’t want to mess up the inner core after it is exposed.
I’m also posting some of my “custom” wiring loom separation. This is only mock-up for wire length and path. After they are all made up, I’ll go back and replace the tie-wraps and pretty things up a little. I ran out of DG12 adel clamps again (for the third or fourth time). DG12 is the size of most of the engine mount tubes (3/4″). I wonder how many pounds of adel clamps I will be carrying around on this thing when it is done.
