Brake fluid
I filled the brakes with brake fluid. I pressure bled the lines using a 1gal. garden sprayer hooked up to each caliper. I used standard tygon tubing and a barbed fitting at the reservoir for overflow into a quart can clamped to the engine mount. It all worked perfectly. A piece of NyloFlow pitot/static tubing snaps nice and tight over the caliper bleed nipple. No leaks so far. I’ll keep a close eye on the fittings, but I don’t expect any issues. The whole operation, from assembling the “pressure pot” to cleaning up the tools took a little less than an hour.
