Heated pitot installed
I got the heated pitot tube installed. I had already, long ago, worked out the installation of the tubing so everything was ready to go. I fished the power and ground wires out of the conduit and soldered the connectors on. I then mounted the mast and secured the fitting. All set. I put a fuse in the circuit and flipped the heat switch on the panel. Wow, by the time I got back to the tube, it was very hot. Check, that works.
I moved on to the left wing tip wiring. I got the landing light wired up and some adel clamps installed. I think I have an idea how I’m going to route the wires for the nav and strobe lights as well as the Com2 antenna and MB antennas that are in that wing tip.
Toward the end of the evening, Jim stopped by and had a beer while we BSd.
