Ignition and FWF progress
I spent the day cleaning up and finalizing all of my ignition and firewall forward wiring. I re-tied a lot of wires with lacing cord. I use very few zip ties firewall forward. I routed the mag and lightspeed coil spark plug wires, fun with adel clamps. I sealed up my new firewall penetrations with fire caulk. I found the correct (5/8-18) stop nut at the hardware store for the new tachometer sensor mount. I had to grind it down to less than half its width. It is going to work great.
All that is left is to double check everything, torque and safety wire the prop bolts, cleanup the cockpit and reinstall the seats. Then we’ll be ready to fire it up and check the timing. Maybe this weekend will find it back in the air!
